The Raster 2 comes from the factory configured for mono input and stereo output.  Use our web editor (requires Chrome browser) to configure it for stereo input:


  1. Connect to the web editor using Google Chrome.
  2. Go to the Config tab.
  3. Select the desired Input/Output Configuration:
    Mono In / Mono Out
    Mono In / Stereo Out
    Stereo In / Stereo Out


The setting will be remembered when you turn off the pedal.


The input/output configuration can also be set using MIDI SysEx messages, described in the "MIDI System Exclusive Messages" section of your pedal's manual.  Owner's Manuals are available at http://www.redpandalab.com/downloads


See also: