The Tensor comes from the factory configured for mono input and stereo output. Use our web editor (requires Chrome browser) to configure it for stereo input:
- Connect to the web editor using Google Chrome.
- Go to the Config tab.
- Select the desired Input/Output Configuration:
Mono In / Mono Out
Mono In / Stereo Out
Stereo Dry / Mono Wet
Stereo In / Stereo Out
The setting will be remembered when you turn off the pedal.
The Stereo Dry / Mono Wet setting maintains your dry signal in stereo while processing in mono, to maximize loop time.
The input/output configuration can also be set using MIDI SysEx messages, described in the "MIDI System Exclusive Messages" section of your pedal's manual. Owner's Manuals are available at http://www.redpandalab.com/downloads
See also: