• Never disconnect the pedal’s power while an update is in progress. Otherwise the system software or the pedal itself may be destroyed.
1. Hold down the left footswitch and connect power. 2. The right LED will blink blue. 3. Continue holding the footswitch for 2 seconds. 4. The LED will turn solid blue. The pedal is now in USB Mass Storage mode. 5. Connect the pedal to the computer using a mini USB cable. 6. Open the CONTEXT drive on your computer. 7. Drag and drop the firmware binary (.bin) file to the CONTEXT drive. 8. The left LED will blink to show progress. 9. After the firmware update is complete, the right LED will turn solid green. If an error occurred, the LED will blink red instead.
NOTE: If the firmware update seems to stall, eject the CONTEXT drive from your computer and it should resume. If not, retry the procedure.
10. Once you have a solid green LED, eject the CONTEXT drive from your computer: Mac: click the eject button or drag the CONTEXT icon to the trash Windows: right-click on the CONTEXT icon in My Computer and select “Eject” 11. Disconnect power.
Troubleshooting If the left LED blinks red, disconnect power and try again. If you continue to have problems, please email firstname.lastname@example.org.
Please tell us which LEDs are on, what type of computer, and which operating system you are using.