Context 2

Context 2 reverb/delay balance does not turn off delay completely
This changed in firmware version 2.2. This was a holdover from the Context V1 delay+reverb algorithm.  The input signal and delay output are fed into th...
Tue, 18 Aug, 2020 at 9:54 AM
How To Update Firmware - Context 2
The Context's firmware can be updated via drag and drop using any Mac or PC. Downloading the new firmware 1. Go to
Sun, 20 Sep, 2020 at 7:28 PM
Context with line level and analog synths
The Context 2 can handle line level signals and analog synths with no problem.  It can be configured for stereo or mono input with a variety of bypass modes...
Mon, 12 Oct, 2020 at 4:24 PM
Matching Context V1 settings - Cathedral
The Context 2 cathedral is an updated version of the Context V1 cathedral algorithm.  The Context 2 has a higher sampling rate, lower noise, more headroom, ...
Sun, 6 Dec, 2020 at 2:53 PM
Context 2 default shift settings
Setting DELAY and FDBK to 7:00 will turn off the delay.  A common source of confusion is to turn off only the delay, which will give you a resonant/...
Mon, 21 Mar, 2022 at 5:25 PM
Shoegaze reverse reverb
Here is a starting point for a shoegaze reverse reverb sound.  For reference, listen to "While You Sleep" by My Bloody Valentine.  In general, you...
Tue, 23 Nov, 2021 at 9:19 PM
Context 2: how to turn off delay
To turn off the delay, hold the SHIFT button and turn both the DELAY and FDBK knobs to 7:00 (minimum). Why do you need to turn down both knobs?  With t...
Sun, 7 Nov, 2021 at 9:09 AM
Context 2: how to turn off dynamics (compressor/expander)
To turn off dynamics, hold the SHIFT button and move the HI knob to 12:00 (center).
Sun, 7 Nov, 2021 at 9:19 AM
How do I know if my Context 2 has the latest firmware?
Your pedal's firmware can be viewed in a .TXT file stored on the pedal's hard drive. To view this file, you will need a USB mini B cable and a compu...
Sun, 7 Nov, 2021 at 9:32 AM
Context 2: Stereo Input/Output
The Context 2 comes from the factory configured for mono input and stereo output.  Use our web editor (requires Chrome browser) to configure it for stereo i...
Fri, 16 Jun, 2023 at 10:34 AM