FAQ
Our stereo pedals use 1/4" TRS input/output cables. The left channel is on the tip, right channel on the sleeve. This is not the same as a balanced c...
Mon, 21 Aug, 2023 at 10:30 AM
Pedals that default to mono input/stereo output (Context 2, for example) can be configured for stereo input using our web editor (requires Chrome browser). ...
Wed, 14 Sep, 2022 at 6:35 PM
Our newer pedals have a USB mini B socket for firmware updates and MIDI. You will need a standard USB mini B cable, with the appropriate connector on the o...
Thu, 11 May, 2023 at 5:29 PM
You can use any 1/4" TRS to 1/4" TRS patch cable to conect an expression pedal to the CTRL port. Here are some examples, all are available in dif...
Fri, 23 Oct, 2020 at 11:43 AM
The Remote 4 is designed to be both simple and DIY-friendly, so it does not support an expression pedal at the same time. For cases where you need the foot...
Sun, 3 Jan, 2021 at 10:31 AM
On our pedals with tap tempo, you can use any external tap tempo switch with a normally open momentary contact, including multi-output tap controllers. Ta...
Thu, 10 Dec, 2020 at 3:33 PM
Our distribution agreements do not allow us to ship products directly to certain countries. Please check the dealers page on our web site to find a dealer ...
Thu, 28 Jun, 2018 at 2:30 PM
The Bitmap uses a new bit crushing algorithm that was designed to add a little grit and warmth in the 8-16 bit range, like classic samplers. It's a subt...
Thu, 28 Jun, 2018 at 2:14 PM
Line 6 has discontinued the programmable ToneCore module, so we cannot make any more bitcrusher modules. Sorry! Please check out the Bitmap as an alterna...
Thu, 28 Jun, 2018 at 2:15 PM
If you are local or visiting Detroit and would like to stop by our workshop, please send us an email a few days in advance to arrange a time. We have a sma...
Fri, 10 Sep, 2021 at 6:10 PM