Tensor
Due to changes on the Tensor circuit board, there are different firmware packages based on serial number. The firmware update will fail if you use the wron...
Thu, 1 Feb, 2024 at 5:43 PM
Start with the pedal powered on and nothing plugged into the CTRL port. Hold the right footswitch while plugging in the remote switch. The right LE...
Tue, 13 Oct, 2020 at 8:32 PM
Symptoms: Dry signal is heard in bypass (blue light off) Left LED turns red/green normally when HOLD button is pushed No sound is heard when the effect ...
Sun, 6 Dec, 2020 at 2:22 PM
To download the firmware: 1. Go to https://www.redpandalab.com/downloads/#tensor Note: There are multiple versions of firmware for the Tensor. Pedals t...
Mon, 1 Feb, 2021 at 11:19 PM
The version numbers are confusing, but the Tensor was the first pedal built on our current generation of hardware. The "V1" versions of our other...
Fri, 4 Jun, 2021 at 5:17 PM
Problem: You try to update your Tensor's firmware and after dragging the .bin file to the drive, the Tensor gives the following error: Left LED solid...
Tue, 26 Oct, 2021 at 5:21 PM
Your pedal's firmware can be viewed in a .TXT file stored on the pedal's hard drive. To view this file, you will need a USB mini B cable and a compu...
Sun, 7 Nov, 2021 at 9:35 AM
The Tensor comes from the factory configured for mono input and stereo output. Use our web editor (requires Chrome browser) to configure it for stereo inpu...
Tue, 21 Dec, 2021 at 5:07 PM
This applies to Tensor serial numbers 108-066999 and lower when trying to update firmware by using the UpdateFirmware.command script (check the inside of yo...
Wed, 18 May, 2022 at 6:23 PM
Tensors with serial numbers 108-066999 used a different circuit board that had less memory and a mono analog signal path. We have a user-installable upgrad...
Thu, 1 Feb, 2024 at 5:38 PM