MIDI

Keith McMillen MIDI Expander
The Keith McMillen MIDI Expander only works with KMI products.  It cannot be used to connect our products to MIDI DIN cables.
Wed, 30 May, 2018 at 3:28 PM
Supported USB MIDI Hosts
Our products are class-compliant USB MIDI devices. The following USB MIDI hosts have been tested and are verified to work with our products. Compute...
Sun, 20 Dec, 2020 at 8:36 PM
Using a USB MIDI controller
Our products are class-compliant USB MIDI devices.  You can connect multiple USB MIDI devices, including MIDI controllers, synths, and our pedals, but the s...
Mon, 9 Jul, 2018 at 9:32 AM
Tensor Semitone MIDI CC values
Printable PDF is below. MIDI CC VALUE TRANSPOSITION MIDI CC VALUE TRANSPOSITION 40 -2 octave 64 Unison 41 -1 octave + M7 65 m2 42 -1 octave...
Sat, 1 Aug, 2020 at 4:42 PM
Disaster Area Designs Gen3 MIDI Controllers
All of our pedals with USB ports work with the Disaster Area Designs Gen3 MIDI controllers.  Use their gHost adapter and a micro USB cable to connect the pe...
Thu, 17 Sep, 2020 at 2:28 PM
TRS MIDI Using Control Jack
Red Panda pedals with USB receptacles also support 1/4" TRS MIDI input via the CTRL port.  Use our web editor to configure the CTRL port for MIDI In (T...
Thu, 17 Dec, 2020 at 2:46 PM
What is MIDI clock?
MIDI timing clock messages are used to synchronize multiple MIDI devices to a single clock transmitter.  The clock is typically provided by a DAW in compute...
Fri, 24 Jul, 2020 at 3:39 PM
Configuring a MIDI controller for footswitches
Common MIDI Continuous Controllers Our MIDI-capable pedals use a common set of MIDI continuous controllers to automate and control the footswitch actions. ...
Wed, 19 Aug, 2020 at 6:27 PM
Disaster Area Designs micro.ghost Setup
The Disaster Area Designs micro.ghost is a simple USB MIDI host that allows you to connect one of our pedals to MIDI controllers with 5-pin DIN MIDI ports. ...
Wed, 26 Aug, 2020 at 9:53 PM
Disaster Area Designs QConnect Setup
The Disaster Area Designs qCONNECT can support up to eight 1/4" TRS MIDI devices, one USB MIDI device, and 5-pin DIN.  Read the qCONNECT manual to get ...
Wed, 19 Aug, 2020 at 8:40 PM